Tuesday, June 05, 2012: 03:11:21 PM

SensorMed's Surgical Safety Device Uses Solvay's Udel® Polysulfone for High Heat Resistance and Light Dispersion

SensorMed, Knoxville, Tenn., has introduced a disposable version of its CableCap™ laparoscopic safety device, which is designed to eliminate the risk of fire caused by high-intensity surgical light cables in operating rooms. The CableCap device is injection moulded of Udel® polysulfone (PSU) resin from Solvay Specialty Polymers USA, LLC, for high heat resistance, strength and excellent light dispersion.

The simple, one-piece oblong device, which has already received 510(k) clearance from the U.S. Food & Drug Administration (FDA) is designed with four moulded-in fins for optimal light and heat dispersion. The CableCap inserts directly into the distal end of surgical light cables, and should be used at any point during minimally invasive surgery when surgical cables are not attached to scopes. CableCap effectively diffuses the energy generated by the light cables, making them cool to touch and preventing the risk of burns and fires associated with these instruments.

Surgical light cables, which are part of the illumination system used during laparoscopic and endoscopic surgical procedures, can produce heat readings of approximately 450°F (232°C) at their distal ends when hooked up to a standard 300-watt surgical light source, according to SensorMed. Dangers include an exposed cable coming in contact with patient drapes or other fuel sources such as alcohol-based skin prep agents, which can result in serious skin burns or operating room fires. According to published literature and data from the FDA and AORN (Association of periOperative Registered Nurses), surgical light cables are one of the main sources for the hundreds of operating room fires that occur each year, the company said.

After an extensive material testing evaluation, SensorMed opted for Udel PSU over a range of other thermoplastics due to its combination of thermal and light dispersion properties, according to William Milam, VP of Engineering at SensorMed. The material’s transparent amber color offers an optimum balance in terms of light dispersion and heat absorption. A more translucent material would result in a brighter light that would potentially distract surgeons, while an opaque-colored device would retain too much heat. Udel PSU also withstands EtO gas sterilisation and is compliant with ISO 10993-1 for limited exposure, non-implantable applications.

For further details please contact:
Solvay Plastics, USA
Web:
www.solvayplastics.com


Rate me....
Mail this article Mail this article Print this article Print this article

Contribute/ Share your Opinion

More

Page 1 of 10




Search

Keywords:
Sections:

Magazine Issues

Events

logo Other Times Group Sites: